UPVC Roofing Sheet
We are amongst the eminent names in the industry well-acknowledged for manufacturing, supplying and exporting a quality-sorted range of UPVC Roofing Sheets. These products are manufactured with precision and perfection in order to attain highest level of clients’ satisfaction. Available in various dimensions and colours, these products are widely demanded for various domestic and industrial purposes. Our processionals ensure to manufacture these products in strict adherence with the industry standards and norms.

Product Features

  • ENVIRONMENTAL PROTECTION AND ENERGY CONSERVATION
  • ENVIRONMENTAL PROTECTION AND ENERGY CONSERVATION: It is a kind of environmental-friendly, energy conservation and recycling building material popular in developed and developing countries.

  • LIGHT WEIGHT:
  • The weight is 3.5 kg per square meters (2mm). Belonging to light structural material it can effectively reduce the load of the building and save the assumption of building framework materials. In the mean time, it is easy to be handled and lifted, which reduces the construction cost.

  • PRESSURE PREVENTION:
  • Sheets has very good load bearing performance. No damaged when 150kg is evenly loaded with the support distance being 750mm.

  • SOUND & HEAT INSULATION:
  • The coefficient of heat conductivity is 0.104 W/m.0 C, which is about 1/3 of clay tile, 1/5 of 10-mm-thick cement tile, and 1/2000 of 0.5 mm-thick color-coated steel tile. It can well absorb the noise when influenced by storm, hail and windstorm etc..

  • CORROSION RESISTANCE:
  • uPVC sheets can resist the chemical corrosion of acid, alkali, salt etc. for a long time. The test proves that there is no chemical reaction when dipped in the salt, alkali etc.

  • GOOD WATER RESISTANCE:
  • The surface material of uPVC sheet is compact and doesn’t absorb water without the problem of water penetration by micro pores. The single sheet is big and there is very few joint on the roof. The connecting point is tightly connected; therefore the sheet has the outstanding water resistance performance.

  • FLAME RETARDANT:
  • Self extinguishing, the main body material polyvinyl chloride resin and its chemical performance determine that it is difficult to be burned.

  • COST EFFECTIVE & NON-CARCINOGENIC:
  • Cost effective in installation and save construction up to 70%, overlapping waste doesn’t exceed 8%. High utilization efficiency up to 95% and its good for life fully protected from health hazards.

  • TECHNICAL SPECIFICATIONS
  • uPVC 3 Layer Roofing Sheet Compositions

    TOP LAYER
    It is basically UV coatings one type of resin gives strength to top layer in resisting Ultra Violate rays as well improves heat conductivity. It is also provides strength to product in acidic and corrosion effects. 
     
    MIDDLE LAYER
    It is basically foam and it works as thermal and sound properties. Foam is light weight and because of this layer the product weight is comparatively less.

     

    BOTTOM LAYER
    It is the material provides toughness to the product from bottom at the same time increase rigidness as well its white color increase light illumination. 

     

  • PROFILES
  •           

    Trapezoidal Profile     Round Wave Profile     Wall Cladding Profile

  • INSTALLATION ACCESSORIES
  • (a)CORRUGATED V RIDGE

    Thickness: 1, 1.5, 2, 2.5, 3 (mm), Width: 1130 mm (1.13mtr.) Length: 250mm + 250mm, Angle of ridge: optional (90~180 degree) No product is bad if it is installed properly using its recommended accessories by OEMs. In any product or equipment installation plays key role in the performance and life cycle. When product is good but the installation is not done as per the standards there may be chances of water leakage, distortion after installation so we recommend accessories for installation of our uPVC Roofing Sheets for its better performance and long life. We always recommended and advise to our Buyer’s to use fixing accessories and get it installed by well experienced Fabrication company to enjoy the long life of our uPVC Roofing.

    (b)FIXER CAPS WITH SCREW

           

    Tapping Screws & Fixer set (19mm, 25mm, 55mm & 65mm) The Screw with Fixer cap and “O” ring helps to resist corrosion on the Screws, avoid water leakage and withstand strong wind. The fully sealed screw lead, screw head to solve the corrosion, water proof apron aging and screw holes of the leakage problem; pressed with a waterproof apron below, to prevent infiltration of surface water.

    (c)GUTTER

    We advise our entire Buyer’s to fabricate the Gutter on site only with the help of Plain uPVC Sheet as per the actual requirement. Your fabricator can fabricate it on your site only with the help of Hot Air Gun and required angle can be adjusted.

    (d)TURBO

    VENTILATOR Sizes: 21” & 24”Turbo Ventilator has base of Transparent FRP Sheet and because of that the Shed gets sunlight which is one of the key advantage and also may affect at some point in electricity saving. Turbo Ventilator is one of the key accessories in the Roof. This Turbo Ventilator maintains the Air pressure under the roof as well helps in exhausting hot air and keeps the shed cool.

  • INSTALLATION GUIDELINES
  • WORD FILE ATTACHED HEREWITH THE SAME NAME INSTALLATION GUIDELINE (THIS INSTALLATION GUIDELINE SHOULD BE PREPARED PERFECTLY AS PER DION’) NOTE: I HAVE ATTACHED 3 COMPNIES CATALOG (DION, SUN ARCH, WONDER) FOR YOUR REFERENCE AND ACCORDING TO THEIR PHOTOGRAPHS GET BEST PHOTOS FROM YOUR DATABASE WHICH LOOKS SOME DIFFERENT FROM THEM.